Dedicated Micros 2060 Manuel D'installation page 13

12. Control Configuration
Fig.19 RS485 configuration
1 to 32 Dome Cameras
Local
RS 485
PSU
230Va.c
Data Link
input
(Daisy chain)
connect to
controller
Video cable
Fig.20 Twisted Pair Configuration
1 to 16 Dome Cameras
drx 100
+ PSU
4 x local
Video cable
alarms
Fig.21 Up the co-ax Configuration
1 to 16 Dome Cameras
Local
PSU
230Va.c.
Input
Video cable
2060 Operation Manual
Local
PSU
230Va.c
input
Video cable
To Controller
Local
230Va.c. Input
drx 100
+ PSU
Twisted Pair
(20mA)
(current loop)
4 x local
Video cable
alarms
To controller
Local
PSU
230Va.c.
Input
Video cable
To controller
The Dedicated Micros 2060 dome can be
controlled by one of three methods.
Fig.19 RS485
Fig.20 Twisted Pair Configuration
Fig.21 Up the co-ax
The configuration drawings on this page
show the three connection arrangements.
2060 Domes are delivered with address
switches set at ...253 (DEN PANEL)
2060 with drx Domes are delivered with
address switches set at...1
Termination Resistor Link
Fitted - Resistor in (default)
Not fitted - Resistor out
Yellow
Address
Switch
Blue
Address
Switch
Page. 11