Panasonic SV-PT1PP Manuel D'utilisation page 33

All manuals and user guides at all-guides.com
Selecting Presentation Content
You can select specific slides from the index to be displayed. If you wish to include all
images in the index, this procedure is not necessary.
1
Do Steps 1~3 on page 32. In Step 3,
select "SET CONTENTS", then press
SET.
2
Press to select a folder, then
press SET.
• Folder contents will be displayed.
3
Press to select "SLIDE SELECT",
then press SET.
• Selecting "RETURN" displays previous slide.
4
Press to select a slide, then
press SET.
• Pressing SET again cancels selection.
• " " appears at bottom, right corner of a
selected slide.
• Repeat Step 4 until all slides to be displayed
are selected. Presentation will be in the order
slides were selected.
5
Press MENU when selection is
complete.
6
Press to select "YES", "CONTINUE"
or "CANCEL", then press SET.
• YES : To finish selection.
• CONTINUE: To continue selection.
• CANCEL : To cancel selection and return
to menu.
To unselect images:
Press to select "RELEASE", then press
SET.
• The selected images are returned to the their
original state.
To preview the presentation contents
(REHEARSAL):
Press to select "REHEARSAL", then
press SET.
• Each slide will appear approx. 2 seconds.
• Pressing CANCEL will cancel this operation.
• Pressing SET will pause this operation.
• When the number of saved files is great, it may
take time to go into Pause/Stop mode.
7
Press to select "RETURN", then
press SET.
• To proceed with presentation, return to
Step 3 on page 32.
PT1.p29-33.p65
TV Mode (Presentation)
33
33
2003/01/14, 12:37