Section 3 − Definitions; Warning Label Definitions - Unitor UPC 838 Manuel De L'utilisateur

3-1. Warning Label Definitions

8
9
SECTION 3 − DEFINITIONS
Warning! Watch Out! There are
possible hazards as shown by the
symbols.
1
1.1 Keep flammables away from
1.2 Cutting sparks can cause
1.3 Do not cut on drums or any
2
2.1 Turn off power before
2.2 Do not grip material near
2.3 Wear complete body
3
3.1 Wear dry insulating gloves.
3.2 Protect yourself from electric
3.3 Disconnect input plug or
4
4.1 Keep your head out of the
4.2 Use forced ventilation or local
4.3 Use ventilating fan to remove
5
5.1 Wear hat and safety glasses.
6
7
11
8
9
10
10 Use a proper cart to move
11 Do not use one handle to lift
Cutting sparks can cause
explosion or fire.
cutting. Do not cut near
flammables.
fires. Have a fire extinguisher
nearby, and have a
watchperson ready to use it.
closed containers.
The plasma arc can cause
injury and burns.
disassembling torch.
cutting path.
protection.
Electric shock from torch or
wiring can kill.
Do not wear wet or damaged
gloves.
shock by insulating yourself
from work and ground.
power before working on
machine.
Breathing cutting fumes can
be hazardous to your health.
fumes.
exhaust to remove the fumes.
fumes.
Arc rays can burn eyes and
injure skin.
Use ear protection and button
shirt collar. Use welding
helmet with correct shade of
filter. Wear complete body
protection.
Become trained and read the
instructions before working on
the machine or cutting.
Do not remove or paint over
(cover) the label.
Falling equipment can cause
injury and damage to unit.
Always lift and support unit
using both handles. Keep
angle of lifting device less
than 60 degrees.
unit.
or support unit.
11/00
OM-202 515 Page 9