Mounting Instruction - NOMA 52-2510-0 Manuel

All manuals and user guides at all-guides.com
WARNING:
electrician according to the electrical safety. The baseboard heater
must be grounded in accordance with all national and local building
codes. All electrical connections shall be made inside the junction
box at the back of the unit.

MOUNTING INSTRUCTION

CAUTION:
to avoid any electric shock.
1. Loosen the screws to remove the Clamp from the end of heater.
2. Remove the wire nut and separate the wire leads.
3. Place cable on top of the clamps, strip and connect to the heater lead wires
with wire nuts.
All wiring must be installed by a certified
Disconnect the power before installation in order
- 4 -