Memorex MPH7825 Manuel page 8

Base Unit
(Side View)
NOTE: If you do not have a standard modular wall jack, find a qualified technician to mount
one on the wall.
B. WALL MOUNTING (No Standard Wall Jack)
1. Drill two holes with a vertical distance between the two
marked positions of 3
2. Drive a screw into each of the holes. Tighten them to the
end of the screw line, only leaving the smooth part of the
screw head outside the wall.
3. Hang the unit onto the screws, and then slide it down firmly to
fasten the base securely.
BASE RETAINER TAB
If the base unit is to be placed in the wall mount position, the base retainer tab allows the
handset to hang onto the base unit.
Retainer Tab
BELT CLIP INSTRUCTION
Clamp the belt clip at the back of the handset as shown in Figure 7.
All manuals and user guides at all-guides.com
Telephone Modular
Wall Jack
Wall Mount
Slots
Wall Mounting
Bracket
(Figure 4)
" (100 mm) as shown in Figure 5.
15/16
(Figure 6)
Belt Clip
(Figure 7)
7
Studs
3 "
15/16
(100 mm)
(Figure 5)