Panasonic VIERA TC-P58VT25 Guide Rapide page 39

Menu list
Menu Item
Lock
Closed caption
3D settings
Channel surf mode
Language
Clock
ANT/Cable setup
Input labels
Pixel orbiter
Time (minutes)
4:3 side bars
Scrolling bar
Network settings
VIERA Link
Power on link
Power off link
Energy saving mode
Unselected device
energy save
Default speakers
No signal for 10
minutes
No activity for 3
hours
Keyboard type
Auto power on
Image viewer LED
Image viewer
auto play
First time setup
About
Reset to defaults
Sub menu list
Menu Item
Channel surf mode
Set favorite
Edit CH caption
Signal meter
In the AV mode, the Audio and Setup menus give fewer options.
* Confirmation screen is displayed. Select "Yes" and press OK to reset.
All manuals and user guides at all-guides.com
Adjustments/Configurations (alternatives)
Locks the channels and programs. (p. 50)
Displays subtitles (Closed caption). (p. 54)
Set the 3D settings. (p. 24)
Sets the mode to select the channel with the Channel up/down button.
(All/Favorite/Digital only/Analog only)
•
Favorite: Only channels registered as FAVORITE. (p. 20)
Selects the screen menu language.
Adjusts the clock. (p. 17)
Sets channels. (p. 53)
Selects the terminal and label of the external equipment. (p. 55)
Prevents "Image retention" with Wobbling. (Automatic/Periodic)
•
Automatic: Shifts the display image automatically.
•
Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the "Time (minutes)" menu.
Sets the time for the "Pixel orbiter-Periodic" setting. (1/2/3/4)
Changes the brightness of the side bar. (Off/Dark/Mid/Bright) (4:3 mode only)
•
The recommended setting is "Bright" to prevent the panel "Image retention". (p. 62)
Press "OK" to start the horizontal "Scrolling" on the screen. (p. 62)
Sets Network settings. (p. 46)
Controls the equipment connected to HDMI terminals. (Off/On) (p. 42)
•
"Power off link", "Power on link", "Energy saving mode", "Unselected device energy save"
and "Default speakers" cannot be selected if "Off" is set.
Sets "Power on link" of the HDMI connected equipment. (No/Yes) (p. 42)
Sets "Power off link" of the HDMI connected equipment. (No/Yes) (p. 42)
Sets "Energy saving mode" of the HDMI connected equipment. (Quick start/Save) (p. 42)
Sets "Unselected device energy save" of the HDMI connected equipment. (p. 42)
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Selects the default speakers. (TV/Theater) (p. 42)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
•
Not in use when "Auto power on", "On/Off Timer" or "Lock" is set, or while "SD mode" or "Digital
Channel" is selected.
•
"No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No signal for 10 minutes".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
•
Not in use when "Auto power on" or "On/Off Timer" is set, or while "PC inputs" is selected.
•
"No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Select keyboard type. Operate USB keyboard. (p. 19)
(U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin America)/Spanish (Spain))
Turns TV On automatically when the cable box or connected device is turned On. (No/Yes)
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
•
The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 56)
Set to "On", if you want to light Image viewer LED while SD card is inserted. (On/Off )
Sets the media contents or playback type to play back SD cards automatically.
(Slideshow/Photos/Videos/Music/Set later/Off)
Restarts the first time setup from "Language" setting. (p. 14)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings. (p. 52)
Adjustments/Configurations (alternatives)
Sets the mode to select the channel with the Channel up/down button.
(All/Favorite/Digital only/Analog only)
Sets favorite channels. (p. 19)
Changes the station identifier. (p. 53)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 53)
39