Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Manual
In case of difficulty
If you have difficulty with your thermostat, please try the suggestions below. Most
problems can be corrected quickly and easily.
Screen is
•
Check circuit breaker and reset if necessary.
blank
•
Make sure power switch at heating & cooling system is on.
•
Make sure furnace door is closed securely.
•
To change the screen brightness or color, see backlight options in the Preferences menu
Screen is
difficult to
(see page 21).
read
•
At 2 am each day, Prestige thermostats change screen colors for an hour, to prevent burn-
in. Touch the screen at any time to restore pre-set screen colors.
•
Heating
Press
or cooling
Inside temperature.
system does
•
Press
not respond
Inside temperature.
•
Check circuit breaker and reset if necessary.
•
Make sure power switch at heating & cooling system is on.
•
Make sure furnace door is closed securely.
•
If "Waiting For Equipment" is displayed, the compressor protection timer is on. Wait 5
minutes for the system to restart safely, without damaging the compressor.
69-2703EFS—03
to set system to Heat. Make sure the temperature is set higher than the
sYstem
to set system to Cool. Make sure the temperature is set lower than the
sYstem
34
Publicité
Table des Matières
