Assembling Your Scooter - HOMCOM 120 Pro Manuel De L'utilisateur

1.A. Use the allen key to lock the handlebar
to the stem. B.And then lock the clamp.
3.Ensure wheel nuts are tight.

3.Assembling your scooter

ALL FIXTURES SHOULD BE CHECKED ON A
REGULAR BASIS TO ENSURE THEY ARE
SUFFICIENTLY TIGHTENED.
4.Charging the scooter
1.Only use the supplied and dedicated charger.
2.Open the charging port rubber cover on the footplate and insert the
charger output connector into the charging hole.
3.Plug the charger into the power socket supply.
4.The charger indicator is red, indicating that it is charging. When the
charger indicator shows green, the battery isfully charged.
5. When the battery is fully charged unplug the charger from the mains
power supply and from the scooter, then close the charging port
rubber cover. Do not charge overnight
6.The electric kids scooter is ready to use.
-4-
2.Ensure headset clamp is positioned at the
very bottom of stem and tighten.