YABER Y30 Mode D'emploi page 9

Connecting an iPhone:
1. Connect the projector and iPhone with Lightning to HDMI cable (not
included)
2. Choose the signal source: "HDMI"
3.Connecting a DVD player
1. Use the supplied AV cable to connect the DVD player to the projector.
2. Turn on the projector and DVD player.
If your player has an HDMI output, it is best to use it over the analog (AV)
option. Audio output must be configured from the DVD player menu if
external speakers are installed.
4. Connect the soundbar
1.Use the supplied AV cable to connect the soundbar to the projector.
2. Turn on the projector and the sound bar.
Adjust the tilt base
1. Press and hold the tilt button on the back of the projector.
AV
Audio-out
06
video
audio out
(L/R)
audio out
(L/R)