Bravetti KS700B Guide Du Propriétaire page 3

Getting to Know Your Food Slicer
FRONT VIEW OF
FOOD SLICER
1. Safety Switch
2. ON/OFF Button
3. Main Unit
4. Scraper
5. Food Tray
Technical Specification
Voltage: 120V., 60Hz.
Power: 90W, 0.75A.
* Illustrations may differ from actual product.
All manuals and user guides at all-guides.com
REAR VIEW OF
FOOD SLICER
6. Food Press
7. Feeder
8. Adjustment Plate
9. Thickness Adjustment Knob
10. Stainless Steel Blade
11. Blade-Locking Screw
3
Operating Instructions
CAUTION:
BLADE IS SHARP. HANDLE CAREFULLY.
Assembling Instructions
1. Remove all packing materials from
the Food Slicer.
2. Before assembling the Food Slicer,
wash the parts using the cleaning
instructions on page 6.
3. Place the Food Slicer on a flat,
horizontal, and hard surface so that
the appliance has good adhesion.
Attach feeder to the base of the unit.
(Fig. 1) Once feeder is attached,
attach food press to feeder. (Fig.2)
Fig. 1
Fig. 2
Operating the Food Slicer
1. Place the Food Slicer on a flat,
horizontal, and hard surface so that
the appliance has good adhesion.
Orient the slicer so that the back of
the slicer is facing your left.
2. Plug power cord into 120 VAC
electrical outlet.
3. To turn on the appliance, first push
the safety switch from the "LOCK"
position to "UNLOCK", then without
releasing the safety switch, press
down on the ON/OFF button. (Fig. 3)
LOCK UNLOCK
Fig. 3
4. To turn off the appliance, release
the ON/OFF button and safety
switch. The ON/OFF button and the
safety switch will return to the off
position automatically. The slicer will
stop within seconds.
5. Set desired slicing thickness by
turning the thickness adjustment
knob. (Fig. 4) The thickness
adjustment knob has slice thickness
settings from 0 to 22 millimeters.
Always return the thickness
adjustment knob to setting "—" after
use.
Fig. 4
4