Audio Settings - Panasonic CQ-C5403U Manuel D'instructions

E

Audio Settings

N
G
L
I
S
H
21
[SQ] (Sound Quality)
Volume
Default: 18
Setting range: 0 to 40
Bass/Treble
You can adjust the bass and treble sounds.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ). (a
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid : ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡ The bass/treble control level of each frequency is fixed to the
frequency that has been selected for SQ.
FTo return an adjusted SQ to the default setting
q Press [SQ], and select the SQ which is to be returned to
the default setting. (Only for main unit)
w Press and hold [BAND] for more than 2 seconds.
22
CQ-C5403U/C5303U
Preset Buttons [2] to [6]
Page 11)
Turn [VOLUME]. (Press [VOL
[VOL ] on the remote control unit.)
{
[D] (DISP) (Return to the regular mode)
] or
}
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
[ [ ] / [ ] ]
[{] / [}]
[BAND]
Press [VOLUME] (PUSH SEL)
to open the menu.
Press [VOLUME] (PUSH SEL) .
Press [VOLUME] (PUSH SEL) .
Press [VOLUME] (PUSH SEL) .
The SQ adjustment mode can be
established also by pressing [SQ]
for more than 2 seconds.
(Page 24)