Product Information; Application Instructions; Unpacking; Spare Parts List - IKA S 25 N - 8 G Manuel

• Dispersing causes the medium to heat up.
• Note the min./max. immersion depth in the "Technical data".
• The function of the dispersion tools depends on the condition of the sharp
edges of rotor and stator (integrated in the shaft tube). Abrasive media can
round off these edges fast, whereby the disperse effect diminishes.
• The gasket and bearings are made of PTFE and rustproof steel; the fol-
lowing points should therefore be noted: Chemical reactions of PTFE
occur in contact with molten or solute alkali metals and alkaline earth
metals, as well as with fine powders of metals in groups 2 and 3 of the
periodic system at temperatures above 300 °C - 400 °C. Only elemen-
tary fluorine, chlorotrifluoride and alkali metals attack it; halogenated
hydrocarbons have a reversible swelling effect.
(Source: Römpps Chemie-Lexikon and "Ulmann", Volume 19)
- The shaft bearing of the dispersion tools consist of a slide bearing (PTFE).
- All materials are FDA (Food and Drug Administration) conform.
Application: Wet crushing, dispersions, emulsifying (Batch-operation).

Unpacking:

- Please unpack the device carefully.
- In case of any damage, a detailed report must be sent immediately (post,
rail or forwarder).
Delivery scope:
- Dispersion tool according to you order
- Flat key (see Fig. 1)
- Shaft key (see Fig. 1)
- Mesh bag (for collecting and packaging small parts of the dispersion
tool for cleaning, e.g. washing the rotator, grooved piston ring bearing,
washer disc and centrifugal separator in dishwasher.)
- Hook (for hook and hang the service card, see Fig. 2)
- Technical information
- Short instruction.
S 25 N - 8 G, S 25 N - 8 G - ST
Item Designation
4 Shaft tube
5 Shaft
6 Rotor
7 Grooved piston ring bearing
8 Washer disc
Spare parts diagram see front page.
For orders of spare parts, please specify the type of dispersion tool and the
designation of the spare part.

Product information

Application instructions

Unpacking

Spare parts list

S 25 N - 10 G, S 25 N - 10 G - ST
Item Designation
4 Washer disc
5 Grooved piston ring bearing
6 Rotor
7 Centrifugal separator
10 Shaft
12 Shaft tube
8