Name Of Parts - ZALMAN ZM-WE450 Mode D'emploi

3. Name of Parts

③
④
4. Assembly Product
① Remove the top cover and HDD into Shielding and fixed by 2 bolt A and Bolt cover.
② HDD set into PCBA and close top cover
(Apply EMI Shielding tape)
4
① ②
⑤ ⑥ ⑦ ⑧
No.
① USB 2.0 Port : Power bank
② micro-B USB Port : USB 3.0 Cable
* Long press more than 2sec
③
*Short press less than 2sec
: Display the battery capacity
④ Long press button(15sec) : Restore Factory
⑤
⑥
⑦
Power / Charger indicator
1) Power Level 50 ~ 100% : Green LED
⑧ 2) Power Level 25 ~ 49% : Yellow LED
3) Power Level 0 ~ 24% : Red LED
4) Unit charging : Flashing Green LED
③ Bolt B from bottom and add rubber foot
Bolt B
WWW.ZALMAN.COM
Parts
Power button
: Power On / Off
Reset button hole
Settings
WiFi indicator
Bridge mode indicator
External HDD indicator
Bolt cover
Bolt A
Rubber foot