iComfort IC1150 Manuel D'instructions page 5

Step 3:
Leg rest installation
1. Unscrew from hangers of leg rest
2. Connect all three air tubes of the leg rest to the chair according to the color codes.
3. Connect the leg rest power cable to the socket on the chair.
4. Lift the legrest and insert both axis (rotation shafts) on the hangers.
5. Put the rotation shaft board down and screw it tight.
Step 4: Armrests installation
1) Unscrew the M6 screw on the seat frame
2) Press the button on the fixed hole inside the back of the armrest. Insert the fixed hole into the side bolt of the
side of the armrest.
3) Insert the square tube into the side piece of the seat frame.
4) Slightly move the armrest to make them front and back panel match bolt hole on the seat metal frame. Then
screw the M6 screw on the hole.
All manuals and user guides at all-guides.com