Unpacking Instruction - Power Dynamics PD632BP Manuel D'instructions

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1. Power ON/OFF
2. Volume controller
3. Microphone input 3.5mm Jack screw connector
4. Antenna
5. Up Button
6. Set Button
7. Down Button
8. Open button
Press button and press the battery cover down.
9. Display
Menu
CHAN Press SET to confirm selected menu. Press
channel and confirm with SET.
tUNE Press SET to confirm selected menu. Press
operational frequency. Press SET again to confirm.
dISPL Press SET to confirm selected menu. Press
CH" or "dI Fr". Press SET again to confirm.
LOC Press SET to confirm selected menu. Press
OFF" or "LOC ON".
Press SET again, then press
unlock.
QUIt Press SET to leave menu.
or to select
or to select the
or to select "dI
or to select "LOC
or to choose "LOC OFF" to
4
Choose
Channel 01-20
Frequency 863.000 ~ 865.000Mhz
dI CH shows the microphone channel
in display
dI Fr show the microphone frequency
in display
LOC OFF will unlock the buttons
LOC ON will lock the buttons