iwc AQUATIMER CHRONOGRAPH Mode D'emploi page 34

S E T T I N G Y O U R W A T C H C O R R E C T L Y
To set your watch correctly, proceed as follows:
– Release the crown by turning it to the left.
– Wind the movement (approximately 20 revolutions of the
crown).
– Pull out the crown to position 1.
– Turn the crown to the right to advance the date display in
steps. Set the display to yesterday's date.
– Turn the crown to the left to advance the day display in steps.
Set the display to yesterday's day.
– Pull out the crown to position 2. This will stop the movement.
To set the time accurately to the second, it is best to stop the
movement as the seconds hand passes 60.
– Turn the hands forwards until the date display changes to
today's date. The hands will now be positioned between
12 midnight and 1 a.m.
– Now turn the hands forwards to the current time. If you are
setting the watch in the afternoon, you must turn the hands
past 12 (noon) again. Now move the minute hand a few minute
strokes beyond the time to be set. Then position the minute
hand by moving it gently backwards until it is exactly above
the correct minute stroke. This ensures that the minute hand
begins to move immediately when you restart the movement.
All manuals and user guides at all-guides.com
— 3 4 —
A Q U A T I M E R C H R O N O G R A P H