EHEIM compactON 5000 Mode D'emploi page 23

English
All manuals and user guides at all-guides.com
4. Commissioning
Connecting the hose
1. Use a saw to shorten the connecting piece to the diameter of your hose (⌦A).
2. Screw the connecting piece onto the pump.
3. Connect your hose to the connecting piece.
Attaching the mounting plate
1. Screw the suction devices into the openings of the mounting plate (⌦B).
2. Move the mounting plate until it locks into the guides on the underside of the motor
body (⌦C).
In order to remove the mounting plate, the release lever a must be pressed.
Installing the intake nozzle for external use
The pump can be used inside and outside of the aquarium. For example, the connecting
piece b facilitates the connection of a hose.
1. Use a saw to shorten the intake nozzle to the diameter of your hose (⌦A).
2. Screw the intake nozzle onto the pump housing (⌦D).
3. Connect your hose to the intake nozzle.
Installing the filter basket
1. Attach the desired filter basket to the pump housing(⌦D).
5. Operation
CAUTION! Material damage.
The pump must not run dry.
Switching the pump on/off
1. Inside the aquarium: Attach the device below water level at the bottom or the inside
of your aquarium (⌦E). Pay attention to the maximum pond depth (see Technical
data).
Outside the aquarium: Attach the device to a stable surface outside of your aquari-
um (⌦F). The suction devices serve as vibration dampers.
19