English - Koenic KCP856 Mode D'emploi

English

Congratulations
Thanks for your purchase of a KOENIC product.
Please read this manual carefully and keep it
for future reference.
Before first time use
Before using the juicer, it must be cleaned as
described in Cleaning and care.
Juicing
1. Attach juice container to the drive shaft of
the base unit.
2. Place the pulp sieve on the juice container.
3. Fit the small juicer cone onto the drive shaft.
If necessary, fit the large juicer cone on top
of the small cone.
4. Push the spout upwards to keep extracted
juice in the container. Push downwards to
collect juice into an external container.
5. Cut fruit in half and lightly press them onto
the juicer cone; drive shaft will start rotat-
ing. Release pressure to stop.
6. If the appliance is not use, clean it, remove
plug and attach the cover to the base unit.
Cleaning and care
1. Unplug the appliance from the mains supply.
2. Clean the base unit with a slightly damp,
lint-free cloth. Do not immerse in water.
3. Clean the attachments thoroughly using
warm water and a mild detergent. The pulp
sieve may also be cleaned in a dishwasher.
14
All manuals and user guides at all-guides.com
1
Place the juice con-
tainer onto the base
unit.
3
Fit desired juicer
cone to the drive
shaft.
4/5
Extract to juice
container.
After use unplug the
appliance.
2
Place the pulp sieve
on the juice con-
tainer.
Plug in the appliance.
4/5
Extract to external
container.
6
Attach cover after
use.