Contact Information - Dynex DX-ESW5 Guide De L'utilisateur

All manuals and user guides at all-guides.com
DX-ESW5-ESW8.fm Page 5 Friday, April 29, 2005 4:25 PM
Dynex DX-ESW5 and DX-ESW8 Ethernet Switches
Troubleshooting
Problem
The power LED is not on. • Make sure that the AC power adapter is correctly connected to an
• Make sure that the power source (such as a power strip, UPS, or
• Make sure that you are using the AC power adapter supplied with
A port's Link/Act LED is • Make sure that the network cable jacks are firmly plugged into the
not on when a device is
connected to the port. • Make sure that the connected device is on and that its adapter is
• Make sure that the cable is less than 328 feet (100 meters) long.
• Try another cable that you know is good.

Contact information

For help with the installation or operation of the DX-ESW5 or DX-ESW8 switches,
contact us at (800) 305-2204.
© 2005 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise
Services, Inc. Other brands and product names are trademarks or registered trade-
marks of their respective holders. Specifications and features are subject to
change without notice or obligation.
Solution
AC power outlet.
surge protector) is on.
your switch.
switch and the device.
installed correctly and is working.
5