Service And Support; Model And Serial Numbers - sunjoe SDJ616 Manuel De L'opérateur

5. Refer to the above steps to replace another cutting line
(Fig. 19).
Fig. 19
NOTE: There is a built-in line cutter that will cut and trim the
lines slightly longer than desired.
m
WARNING!
For optimal performance, use only
replacement cutting lines designed specifically for this electric
leaf mulcher + shredder (Model SDJ616L).
Monofilament lines having a maximum diameter of 0.1 in.
(2.5 mm) and a maximum length of 12.6 in. (320 mm) long may
be temporarily substituted, but this is NOT recommended.
Use of thicker lines, lines made of substitute material, or lines
greater than 12.6 in. (320 mm) long may result in permanent
damage to the motor and will void the manufacturer's
warranty. Immediately replace any worn parts of the spinner
head.
Storage
When storing the electric leaf mulcher + shredder at the end
of the season, disassemble the unit and stack the parts in the
following order (Fig. 20):
1. Place the funnel into the box.
2. Fit the motor bracket into the funnel.
3. Place the funnel cover onto the motor bracket.
4. Rest the legs in the box beside the funnel.
Fig. 20

Service and Support

If your Sun Joe bladeless electric leaf mulcher + shredder
®
requires service or maintenance, please call the Snow Joe
Sun Joe customer service center at 1-866-SNOWJOE
®
(1-866-766-9563).

Model and Serial Numbers

When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing or handle
of your electric leaf mulcher + shredder. Copy these numbers
into the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
S D J 6 1 6
Serial #:
11
+
®