Table des Matières
Publicité
Add-on kit
➤Proceed as shown (fig. 8, page 5).
Using the device
Before first use
1. Remove the plastic tab from the remote con-
trol's battery.
2. Pair the remote control to the remote receiver
(fig. 0, page 5).
Switching on and off
➤Proceed as shown (fig. 9, page 5).
Dimming the light
➤To dim the light continuously, proceed as
shown (fig. a, page 5).
➤To dim the light in percentage steps, proceed as
shown (fig. b, page 5).
Changing the battery of the remote
control
!
WARNING!
Keep batteries away from children.
Troubleshooting
Fault
The remote control does
not work.
8
All manuals and user guides at all-guides.com
Possible cause
The plastic tab that isolates the battery has
not been removed before first use.
The battery of the remote control is empty. Replace the battery with a battery of the
The remote receiver is placed within a
metal enclosure or another closed-off loca-
tion and therefore the RF wireless signal is
compromised.
The remote control is not paired to the
remote receiver correctly.
4445103371
➤Replace the battery with a battery of the same
type (3 V CR2025, see fig. 4, page 4).
Storing the device
➤Store the device in a clean, dry and dust-free
space.
Cleaning and maintenance
!
WARNING! Electrocution hazard
Unplug the device from the power sup-
ply before cleaning and maintenance.
A
NOTICE!
• Never clean the device under running
water or in dish water.
• Do not use sharp or hard objects, abra-
sive cleaning agents or bleach during
cleaning as these can damage the
device.
➤Occasionally clean the device with a soft, damp
cloth.
Solution
Remove the plastic tab.
same type (see chapter "Changing the bat-
tery of the remote control" on page 8).
Place the remote receiver away from any
metal enclosure or closed-off locations.
Pair the remote control to the remote
receiver (see chapter "Before first use" on
page 8).
Publicité
Table des Matières
