Rear Side - AER Compact Slope Mode D'emploi

Compact 60
twin channel acoustic ampli er
IB_Compact60 _20120529
3

3.2 Rear side

1) line out
The line out supplies a pre-amp signal taken
after tone-control, effects and master for forwar-
ding to other appliances.
2) headphones
This output enables you to connect stereo head-
phones and mutes the loudspeaker.
3) send
Send is an output to connect to an external
effect device and in conjunction with return
(input) forms a loop here designed as external
effect loop. The effect can be switched on or off
via footswitch.
4) return
Return as part of the effect loop operates as
3
!!! Warning: Only use
headphones with stereo
jackplugs in this output
socket !!!
line out
headphones
CAU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
Made in Germany by B
signal input from an external effect device (from
output of the effect device). The effect can be
switched on or off via footswitch. Return on its
own can also be used as quasi auxiliary signal
input (-10 dbV).
5) tuner
The tuner output supplies a pre-master signal
(-9 dbV) to connect an external tuner to the
Compact 60
6) footswitch
Connection socket for a double-footswitch (on-/
off-switch, tip = internal effect/ring = external
effect on/off ).
7) DI-out
Preamp-output with symmetrical signal, after
tone-control, pre master, without effects.
8) power on
Combined mains switch with mains socket and
fuse holder.
1 3 5
send tuner
2 4 6
return footswitch DI-out
tip = int. efx 1 = gnd
ring = ext. efx 2 = pos
on/o 3 = neg
power on
8
.
3
7
13