Samsung Smart Home - Samsung FlexDry DV 60M9900 Série Manuel D'utilisation

Samsung Smart Home

Symptom
I could not find
"Samsung Smart
Home" in the app
market.
The Samsung Smart
Home app fails to
operate.
The Samsung Smart
Home app is installed
but is not connected
to my dryer.
Could not log into the
app.
An error message
appears when I try to
register my dryer.
The Samsung
Smart Home app
is successfully
connected to my
dryer but does not
run.
FlexDry_DM9900M-DC68-03381F-03_EN.indd 59
• The Samsung Smart Home app is available for smartphones
that run Android 4.0 (ICS) or higher, or iOS 8.0 or higher.
• The Samsung Smart Home app is available for applicable
models only.
• The old Samsung Smart Dryer app cannot connect with
Samsung Smart Home models.
• You must log into your Samsung account to use the app.
• Use the Samsung Smart Home app to connect and register
the dryer with your home network access point (AP).
• Make sure that your router is operating normally.
• You must log into your Samsung account to use the app.
• If you don't have a Samsung account, follow the app's
onscreen instructions to create one.
• The connection may fail due to the distance from your access
point (AP) or electrical interference from the surrounding
environment. Wait a moment and try again.
• Exit and restart the Samsung Smart Home app or unplug
your router and then reconnect it.
Action
English 59
2017-06-01 3:28:35