Operation - Haussmann N1F-GT-300 Manuel De L'utilisateur

!
Fig.7
Fig.8
Fig.9
Fig.10
Fig.11

OPERATION

WARNING! Remove stones, loose pieces of wood and other objects from the
cutting area. The cutting line continues to rotate for a few seconds after the trimmer
N
is switched off. Allow the cutting line to stop rotating before switching on again.
Do not rapidly switch off and on.
SWITCH ON/OFF
To switch the grass trimmer ON, push and hold the safety button, squeeze the
on/off switch. To switch the grass trimmer off, release the on/off switch.
Replacing the spool kits.
FIRST How to disassemble the spool.
1) Disconnect trimmer from the mains plug.
2) Press together both locking devices (4) at the spool cover (3) and remove
the cover. (Fig.7&8)
3) Remove the spool (2) from the spool cover.(Fig.7&9)
4) Remove the spring.
5) Clean dirt and grass residues.
SECOND How to wind the string.
1) Hook the string in the groove as shown in Fig.10.
2) Wind the string as shown in Fig.11 and hook the two ends in the side
grooves.
8