Problem
Juicer not plugged in
No power to juicer
Incorrect assembly
Juicing bowl has been overfilled with material
Motor has stopped
Overuse has caused the motor to shut down as a
precaution to overheating
Leaking from
Rubber plug on base of Juicing bowl not correctly
beneath the
inserted
Juicing bowl.
Stain on the
Juicing bowl,
Natural color from juicing materials
Strainer, Spinning
brush.
Squeaking noise
Juicing noise from squeezing screw
during operation.
Frozen foods, ice, pips, seeds, unknown
Damage to the
substance or too much material in the Juicing
strainer.
bowl.
All manuals and user guides at all-guides.com
Possible Causes
What To Do
Verify if slow juicer is pluged..
Reassemble the juicer according to the
instructions
Press the reverse power button to try and clear the
clog. May need to be try this a few times.
Warning: Do not press the Reverse button rapidly
and in close succession. Repeating this action in
this manner 5 or more times will cause permanent
damage to the machine.
Switch off and let the motor cool before using
again.
Re-insert the rubber plug on the base of Juicing
bowl into correctly position.
This is perfectly normal. To reduce discoloration
ensure you rinse and clean the appliance
immediately after using.
This is perfectly normal. Ensure you do not
overload the juicer
Ensure you read the instructions carefully on the
correct use of the juicer. Do not overfill the juicer