AEG DK 4460 Notice D'utilisation page 60

Speed timer button
Press button "4" to activate the speed timer; the hood turns off once
the set time expires.
The timer functions in the following way:
• Speed 1 - 20 minutes (the number "1" and a small flashing LED light
appear on the display)
• Speed 2 - 15 minutes (the number "2" and a small flashing LED light
appear on the display)
• Speed 3 - 10 minutes (the number "3" and a small flashing LED light
appear on the display)
• High-speed - 5 minutes (the number "4" and a small flashing LED
light appear on the display)
Press button 1 or button 4 to turn the hood off while the speed timer is
in function; by pressing button 2, the hood returns to the set speed.
Grease filter indicator
After 80 hours of operation, the number "1" starts flashing on the
display.
Press and hold button 1 or 3 to reset the indicator.
Carry out maintenance on the grease filter according to the indications
of this manual.
Charcoal filter indicator
After 320 hours of operation, the number "2" starts flashing on the
display.
Press and hold button 1 or 3 to reset the indicator.
Carry out maintenance on the charcoal filter according to the indica-
tions of this manual.
When both filter signals appear simultaneously, numbers "1" and "2"
will alternately flash on the display.
Reset the indicator by performing the above-mentioned procedure twice.
The first operation resets the grease filter indicator, while the second
operation resets the charcoal filter indicator.
The charcoal filter indicator is not active in the standard mode.
If the hood is used in the recirculation mode, the charcoal filter indicator
must be activated.
60
All manuals and user guides at all-guides.com