Parts Of The Device - EDM Product 07595 Mode D'emploi

07595
REF.

PARTS OF THE DEVICE

INSTRUCTIONS FOR REPLACING THE HEADS
To change accessories, hold the trimmer body with the switch side
facing you. Turn the accessory over and remove it. Place the replace-
ment attachment on top of the trimmer body, then push down and
attach.
USE THE DEVICE
Remove nose / ear hairs
1. Choose the right head for nose hair
2. Slide the switch to the "ON" position.
3. Approximately approach the cutting head to the nostril, simulta-
neously rotating the appliance until all hairs on the nose are removed.
4. Pull the cutting head out of the nostrils again, while turning the
appliance.
5. If you experience any pain or discomfort when using this product,
STOP using it immediately.
6. Disconnect the appliance by sliding the on / off switch.
7. Always clean the head after use and use the cap to protect the head.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
Head for
nose ears
ON / OFF button
INSTRUCCIONES IMPORTANTES DE SEGURIDAD