Attaching/Removing Devices - JVC GV-LS1 Mode D'emploi

Attaching/Removing Devices

Inserting/Removing an SD card
Insert a commercially available SD card before recording.
● Inserting
Insert the card straight with the terminal
facing to the right.
• Turn off the power before inserting/removing the SD card.
• Make sure that the write protect switch of the SD card is not set to LOCK (writing
protected).
• Some cards need to be formatted with this unit. For details, refer to the "Detailed
User Guide".
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
● Removing
Push the card in once, and pull it out
straight.
11