flow-med dry-cap uv 3 Mode D'emploi page 6

ššOperation Clean Mode (2 minutes)
3. Place the dry-cap uv 3® with the hood over the charging station with the rechargeable hearing aids.
4. Press the right button (Clean mode) and the hygiene program (UV-C) starts automatically.
• Ultraviolet light (253,7 nm) eliminates germs and bacteria to 99.9% within 2 minutes.
• After 2 min the dry-cap uv 3® automatically shutdown to stand-by.
Hygiene is complete.
5. Lift the dry-cap uv 3® and place it next to the products. Remove the hygienically cleansed products.
Maintenance and operation
We recommend wet wipes for cleaning your dry-cap uv 3®. Please also read the care and operating instructions for your hearing aids
and charging station. The dry-cap uv 3® is very energy efficient. Only when the lithium-ion battery is empty it must be recharged (see
Using first time). i LED 3 red light. You can interrupt the drying process in Dry&Clean mode by holding the button for more than 3
seconds or by lifting and tilting the unit.
4
i LED 2 blink light
i LED 2 switch off