Installing The Software - V7 CS0300 Manuel De L'utilisateur

CS0300
User's Manual
English

Installing the software

Note: Additional features will be available once you install the
software.
1. Connect the webcam to an available USB port.
2. After the hardware is found, insert the disc into your CD/DVD
drive.
3. Follow the on-screen instructions to install the software.
4. Double-click the Webcam VideoCap icon on your desktop and
then select Device. Make sure that USB 2.0 Webcam is
selected.
Note: The webcam software can also be found online at
www.V7-world.com under the Products and/or Support tabs.
Using the webcam
Important: If you have more than one webcam, set the CS0300
as the default. Double-click the Webcam VideoCap icon on
your desktop and then select Device. Select USB 2.0 Webcam.
Finding the proper location for your webcam
• For best eye contact, put your webcam in the middle of your
monitor.
• Make sure the microphone on the webcam is no more than 3
feet (1 m) away from you and is pointing towards you.
• If you use computer speakers, put them at least 12 inches (30
cm) away from your microphone to reduce feedback and then
angle the speakers away from the microphone.
Focusing your webcam
Firmly grip the black dial on the front of the webcam with your
fingers and turn the dial to the right and left until the webcam is in
focus.
Recording video
1. Double-click the Webcam VideoCap icon on your desktop and
then click Capture.
2. In the drop-down menu select Start Capture.
3. To stop capturing video select Capture again and then Stop
All manuals and user guides at all-guides.com
3
2
1
Recording video with audio
1. Double-click the Webcam VideoCap icon on your desktop and then
2. In the drop-down menu select Record Audio. A checkmark will
3. Click Capture and select Start Capture.
4. To stop capturing video select Capture again and then Stop Capture.
Taking a picture using the webcam
Press the silver snapshot button on top of the camera. The picture is
Taking a picture using the software
1. Double-click the Webcam VideoCap icon on your desktop and then
2. In the drop-down menu select Snap Shot. The picture is automati-
Changing webcam settings
Saving videos and pictures
Pictures and videos automatically save to My Pictures or My
1. Double-click the Webcam VideoCap icon on your desktop and
2. Click File.
3. Select the file type you wish to save (for pictures select Set
4. In the Browse for Folder window select where you would like
Note: To reset where pictures and videos are saved, click File,
Webcam Features
1 Camera lens
2 Focus adjustment dial
3 Snapshot button
Plug and play
Connect the webcam to an available USB
port. The computer recognizes the webcam
and you are ready to start using the webcam.
Capture. The video is automatically saved to My Videos or to
the location you specified.
click Capture.
appear.
The video is automatically saved to My Videos or to the location you
specified.
automatically saved to My Pictures or to the location you specified.
click Capture.
cally saved to My Pictures or to the location you specified.
Videos. To change the location:
then select Device. Make sure that USB 2.0 Webcam is
selected.
snapshot file Folder, for video select Set capture file Folder)
your pictures to be saved.
then File index reset. The files will now be saved to the original
default location.
1