Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Attach the wheels to the bottom of the vacuum cleaner by pushing them firmly into the
holes.
4.
Ensure that the filter is fitted correctly.
5.
Replace the cover on the dust-collector and close.
6.
Connect the hose to the vacuum cleaner by pressing it into the suction inlet and then
turning it to the right. The hose is now locked in place. To unlock the hose, turn it to the
left.
7.
Now connect the telescopic metal tube to the flexible hose.
8.
Now connect the desired floor brush to the telescopic tube.
9.
Your vacuum cleaner is now ready to use.
USE
USING ON DRY SURFACES
1.
Ensure that the filter is fitted correctly inside the appliance.
2.
Insert the plug into the socket.
3.
Switch the appliance using the on/off button.
4.
Clean the dust collector and filter after each use.
USING ON WET SURFACES
1.
Remove the filter from your appliance. (see section on "maintenance and cleaning")
2.
Insert the plug into the socket.
3.
Switch the appliance using the on/off button.
4.
You can now vacuum liquids.
5.
When the collector is full, the vacuum will stop automatically.
6.
Clean the collector after each use.
CAUTION: You cannot use the appliance on wet and dry surfaces at the same time.
CLEANING AND MAINTENANCE
Switch the appliance off and remove the plug from the socket.
CLEANING THE DUST COLLECTOR:
1.
Remove the cover.
2.
When using dry, remove dust from the dust-collector by shaking over a bin, or a sink
when used on a wet surface.
3.
When the dust collector is empty, you can clean it using lukewarm water with a mild
detergent.
4.
Dry the dust-collector carefully before you reassemble the appliance.
32
All manuals and user guides at all-guides.com
BX5100
Publicité
Table des Matières
