Andre Belfort AB-6010 Aphrodite Mode D'emploi page 9

EN
Wind up the watch until the second hand starts to run by turning
the crown clockwise between 30 and 40 times. Pull the crown ca-
refully to position 2. Set the watch to 7 o'clock by turning the crown
counter-clockwise. Push the crown carefully to position 1 and set the
date by turning the crown counter-clockwise. Pull the crown careful-
ly to position 2 again and set the current time by turning the crown
counter-clockwise. When finished push the crown carefully back in to
place. For months with less than 31 days, the date must be changed
manually at the end of the month.
Important! Never set the date between 8 pm and 4 am. The date
changing mechanism is active in this period and any exterior
intervention can damage the movement. When the warranty of
your watch expires, we recommend you to send it in for a revi-
sion to ensure its longevity. A revision should optimally be con-
ducted once a year to counteract general wearout and to main-
tain the water-resistance of your watch.