Andre Belfort AB-4410 Etoile Polaire Mode D'emploi page 9

EN
Wind up the watch until the second hand starts to run by turning the crown
between 30 and 40 times. Pull the crown carefully to position 1. Set the
watch to 7 o'clock by turning the crown counter-clockwise. You may set
the date with button A. With button B you may set the month. Push button
C with a pointed object to set the current day. Button D sets a second time
zone or you may use the ring for 24 hour display. Set the current time
by turning the crown counter-clockwise. When finished push the crown
carefully back in to place. The date/month must be set manually at the
end of the month.
Important! Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time. Please
press the button on your watch slowly and carefully to avoid dama-
ging the mechanism. When the warranty of your watch expires, we
recommend you to send it in for a revision to ensure its longevity. A
revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.