Andre Belfort AB-7510 Plongeur Mode D'emploi page 9

EN
Unscrew the crown by turning it counter-clockwise. Wind the watch by turn-
ing the crown clockwise approximately 30 to 40 turns until the second hand
starts to run. Pull the crown carefully to position 1. Set the watch to 7 o'clock
by turning the crown counter-clockwise. You may set the date with button
A. With button B you may set the month. Press the adjustment pusher C
with a pointed tool until the right day is displayed. Set the current time by
turning the crown clockwise. The indicator in the middle (1–24) is the 24
hour display. When finished push the crown carefully back in to place and
bolt it by turning it clockwise. The date/month must be set manually at the
end of the month.
Important! Never set the date and/or the day between 8 pm and 4 am.
The date changing mechanism is active in this period and any exterior
intervention can damage the movement. If it is necessary to set the
date during that time period, first change the time to any time outside
it, set the date and then reset the correct time. Please press the button
on your watch slowly and carefully to avoid damaging the mecha-
nism. When the warranty of your watch expires, we recommend you
to send it in for a revision to ensure its longevity. A revision should
optimally be conducted once a year to counteract general wearout
and to maintain the water-resistance of your watch.