GIFAS ELECTRIC GIFAS FlashLED Mode D'emploi page 5

Stylus functions:
Icon
5
6
7
Further functions through key sequences:
Blinking function: The common operation of
The blinking frequency can be increased and decreased by pressing the main switch continually
Morse function: If the lamp is switched off, you can generate some light impulses (morse code) by a
keypress on (7). The mode "auxiliary lamp" will be activated automatically as long as the button is
pressed.
Instruction manual: battery charger FlashLED
The battery charger for your FlashLED completes the function of this lamp. It can be used on table
as well as wall-mounted. By using a padlock (accessory), the FlashLED is safe from theft whilst in the
battery charging station.
Settings for emergency light:
Emergency light
ON = factory setting
OFF
Voltage range
Version 230 V
Version low voltage
Emergency light function:
The emergency light function will be activated by changing the magnetic switch to Emergency Light ON
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · Postfach · CH-9424 Rheineck
All manuals and user guides at all-guides.com
Function Description
Main switch To switch on / switch off the lamp:
On / Off Each time you switch on the lamp, the memory function is
activated (setting which was last chosen).
Mode of The switching of the operating modes "long distance
operation beam - working lamp - high beam" happens at keypress
and the appropriate symbol in the display lights up.
Short keypress: recover of the factory setting
Brightness The dimming function will be activated through keypress.
From minimum trough to maximum and back to minimum
(5) and
Description
If the supply voltage fails, the lamp will be switched on in the light-
ning mode "high beam" until the battery threshold reaches or the
supply voltage is available again (3.5 h light duration).
If the supply voltage fails, the lamp stays switched off. Advisable for
recharging from car battery.
Value
220 - 240 VAC
12 - 24 VDC ± 10%
FlashLED
(7) activates the blinking function of the lamp.
5
(5).