PROMAT 4000851221 Mode D'emploi Original page 11

In the case of damages caused by non-compliance with this manual warranty
and guarantee are void. For damage resulting from such we will not assume
liability. Damage to persons or property resulting from improper operation or
non-compliance with the safety notes we will not assume liability. In such
cases warranty and guarantee are void.
Declaration of Conformity Depth Calliper Gauge DIN862
4000851221, 4000851222
NORDWEST Handel AG,
Robert-Schuman-Straße 17
44263 Dortmund
Tel: +49 231-2222-3001
Fax: +49 231-22223099
E-Mail: info@nordwest.com
Internet: www.nordwest.com
We hereby declare that the products to which this declaration refers comply with
the following European Directives:
 2011/65/EU
electrical and electronic Equipment (RoHS)
EN 50581:2012
 2014/30/EU Electromagnetic Compatibility (EMC)
EN 61326-1:2013, EN 61320-2-2:2013
The technical documentations are on file at the department for International
Purchasing at the NORDWEST Handel AG.
Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please
keep in mind that many of its components consist of valuable
materials, which can be recycled.
Please do not discharge it in the rubbish bin, but check with your
local council for recycling facilities in your area.
Restriction of the Use of certain hazardous Substances in
7
Operation