V-TAC VT-5157 Instructions D'installation page 8

• Select your network Wi-Fi and input Wi-Fi password (note: this password must be your
network Wi-Fi password). Then Tap "confirm" [Figure 19], the camera will sound with two
beeps and voice "Network is connecting, please wait". Then wait till the camera confirms with
"Internet connected welcome to use cloud camera". On app it will also show "Addition is
successful"- Select/type the device name (Figure 20 [B]) and tap on "Start to experience".
FIGURE 19
C. ADDITION BY CONNECTING TO
NETWORK CABLE
(ONLY SUPPORT LAN PORT DEVICE)
• Connect the Ethernet cable between
camera and Wi-Fi router.
• Tap on "Addition by connecting to
network cable" (Ref Figure 9).
• Please scan the QR code on the
device and wait for the network
connection to succeed.
FIGURE 20 [A]
FIGURE 21
ENGLISH
FIGURE 20 [B]