Auto Search - Disney Pixar Cars C1320PTVD Guide D'utilisation

OPERATING THE TELEVISION RECEIVER
Connect your TV aerial to the aerial input socket located on the back of the TV.
Push the Main Power Switch, Power Indicator will be illuminated. After a few seconds the TV
screen will light up. Should white dots appear on the screen the TV will require tuning into the
available TV stations in your area.
Pre-setting the TV stations into the Memory
(Note: Preset tuning can only be carried out in TV Mode)
1.TUNE
• Press the MENU ( ) button four times to
select the TUNE mode as show in FIG.1
• Press the " +/-" button to select the SOUND
then press " +/-" button to change the
desired sound system BG or L.

AUTO SEARCH

• Press the " +/-" button to select the AUTO O
SEARCH as shown in FIG. 2
• Press the " +/-" button to start the auto-
matic scanning processes,the scanning
starting from VHF to UHF and the TV sta-
tions will automatic store into memory as
shown in FIG. 3
• When scanning is completed, the set will
tune to lowest program and show lowest
program number on the screen.
• If want to stop auto search function to press MENU ( ) button.
TUNE
AUTO SEARCH
SEARCH
BAND
FINE TUNE
FIG.1
COLOUR
SOUND
SKIP
PROGRAM
TUNE
AUTO SEARCH
SEARCH
FIG.2
BAND
FINE TUNE
COLOUR
SOUND
SKIP
PROGRAM
AUTO SEARCH
FIG.3
VHF-L
-|||||| ||||
VHF-L
AUTO
L
OFF
1
VHF-L
AUTO
L
OFF
1
+
9