SWEEPER 700 M
5-1.2 MOUNTING THE SIDE BRUSH (Fig. 5-1.2)
- Take the brush out of the dirt container.
- Lift the support arm (1) to a vertical position.
- Position the brush (2) against the rotary support. Make sure that brush holes and support holes are matching.
- Firmly secure the brush to its support with the screws (3) supplied with the product.
6-1 USE
Simply push the manual sweeper on the flooring where there is dirt to eliminate.
WARNING:
Do not sweep burning or scorching things, such as cigarettes, matches and the like.
Strings, wires, packing tapes and objects with similar lengths should be collected by hand. Remove
them if they get rolled onto the brushes.
NOTE:
Remember that the number of revolutions of sweeping rolls (thus, efficiency) depends on the speed of
travel.
The dirt container should be emptied after each use.
All manuals and user guides at all-guides.com
3
3
3
2010-01
2
1
FIG. 5-1.2
23