Elbro 2550LCD Mode D'emploi page 14

TESTER 2550LCD
15. Declaration of conformity
This product is in conformity with standards of low voltage in accordance with the regulations 73/23/EEC,
89/336/EEC.
16. Fields of application
The tool is intended for use in applications as described in the operating instructions only.
Any other form of usage is not permitted and can lead to accidents or destruction of the device. Any misuse will
result in the expiry of all guarantee and warranty claims on the part of the operator against the manufacturer.
17. 24 Month Guarantee
Elbro devices are manufactured under strict quality control. If nevertheless functional faults occur during daily
usage, they are covered by a guarantee of 24 months (valid only with receipt).
We will eliminate any manufacturing or material faults without charge providing the unit was not opened or
●
subjected to external influences and was returned to us.
Damage resulting from mechanical effects or improper handling are not covered by the guarantee.
●
Our service department will correct faults occurring after expiry of the guarantee.
Please contact us at:
ELBRO AG • Gewerbestrasse 4 • CH-8162 Steinmaur • Telefon +41 (0)44 854 73 00
Telefax +41 (0)44 854 73 01 • e-mail: info@elbro.com • www.elbro.com
These Operating Instructions have been prepared with great care. No liability will be accepted with respect to the
correctness or completeness of the data, illustrations and drawings.
Technical Changes Reserved
14
All manuals and user guides at all-guides.com