Peaq PPA250-B/WD Mode D'emploi page 31

All manuals and user guides at all-guides.com
ENGLISH
Operation
SENSOR BUTTONS
Sensor buttons for functions can be found
on the panel of the appliance. Touch them
gently to operate them.
START
Flick the toggle switch on the rear of the unit
to the ON position. The display window will
reveal a clock. Press the red STANDBY but-
ton on the remote control.
STANDBY
To turn the unit back into standby mode,
press the red STANDBY button on the re-
mote. Press STANDBY button once again,
the unit returns to the normal operation
mode, and LED displays the current input
source and volume setting.
Alternatively, you can press either VOLUME
UP or VOLUME DOWN on the touch panel
to return to normal operation mode. Press
VOLUME UP or VOLUME DOWN on the
touch panel simultaneously to turn unit back
to standby mode.
MUTE
If current volume level is higher than 10,
pressing MUTE button once will decrease
the volume to level 10. ATT is displayed.
By pressing MUTE button a second time,
unit will go into mute mode and display will
show MUTE.
By pressing a third time, mute mode will be
cancelled, and current volume mode will be
displayed.
NOTE: If current volume level is ≤ 10, ATT
function will be skipped.
INPUT
The IN button on the front panel of the unit
will navigate through the relevant options.
Alternatively use the remote control by
pressing the iPod or AUX buttons.
VOLUME
Press the VOL +/- buttons on touch panel or
press VOL +/- buttons on remote control to
adjust the master volume.
Press VOL+ to increase or press VOL- to
decrease the volume.
LED displays the volume level accordingly.
The maximum volume is 40dB, the mini-
mum value is 0dB.
TREBLE
Press the TREBLE +/- on remote control
to adjust the treble. The adjusting range is
±14dB.
BASS
Press the BASS +/- on the remote control
to adjust the bass of the subwoofer. The ad-
justing range is ±14dB.
30