Table des Matières
Publicité
Playing Music Using Bluetooth
Turn on the RS61 and ensure the Bluetooth LED
is flashing. If the LED is not flashing, press the
Bluetooth button to reset pairing.
Important: Connecting an Aux cable to the Aux input
disables the Bluetooth function. To use Bluetooth, the
Aux cable must be disconnected from the RS61.
Connecting a Guitar
Connect a 1/4 inch instrument cable to your
guitar's output jack. Connect the other end of
the cable to the guitar input on the RS61.
Note: The RS61 is not intended to be used with bass guitars,
microphones, or guitar pedals. For best performance, it is
recommended for use with an electric guitar connected
directly to the RS61.
Adjusting Guitar Controls
Use the Guitar Volume knob to increase or
decrease the volume of the guitar. This can
be used to balance the guitar volume with the
music volume. The volume on the source device
can also be adjusted to balance the volume. Use
the Guitar Gain knob to increase the gain effect
on the guitar signal.
GUITAR
GUITAR
GAIN
INPUT
GUITAR
TREBLE
VOLUME
Pair to "Electrohome RS61" on your source device.
You will hear a sound and the Bluetooth LED will
go solid when paired. Control playback on your
source device.
Note: Unit will attempt to auto-pair to the last paired device.
Bluetooth
MY DEVICES
Electrohome RS61
Playing Music Using Aux Input
Connect an Aux cable from your source device
to the Aux input on the front of the RS61.
Control playback on your source device.
Important: Connecting an Aux cable to the Aux input
disables the Bluetooth input. To use the Bluetooth
input, the Aux cable must be disconnected.
BASS
MAIN
VOLUME
Settings
Publicité
Table des Matières
