Nostalgia NRKPCRT25RR Consignes Et Recettes page 9

Assembly
Use provided tools for assembly: Wrench (K1), Wrench (K2), and Screw Driver (J).
1. Use 6 #4 Screws to assemble Top Cover (B), Bottom Plate (D) and Storage
Compartment (G) together. Make sure that the "X" on the Bottom Plate
is facing DOWN and the flat edge of the Top Cover faces forward.
2. Attach Push Handle (C) and Storage Compartment (G) using two #3
Screws, two #11 Locking Washers and two #9 Nuts. Use Screws to attach
Push Handle to exterior of Storage Compartment. Use Locking Washers
and Nuts on interior of Storage Compartment to secure Push Handle.
3. Lift the upper piece of the Top Cover to fit the Door (F) into place. Use six #4
Screws to attach the Door (F) to the main compartment assembly in Step 2.
7