Location Of Controls - Sylvania SRCD817B Manuel D'utilisation

LOCATION OF CONTROLS

DAIL POINTER
FUNCTION SELECTOR
SKIP UP BUTTON
SKIP DOWN BUTTON
REPEAT BUTTON
VOLUME CONTROL
CD TRAY
HEAD PHONE JACK
FM ST. INDICATOR
RCA AUX-IN JACK
FM ANTENNA
03.
GB
All manuals and user guides at all-guides.com
LED DISPLAY
BAND SELECTOR
PLAY / PAUSE
BUTTON
STOP BUTTON
PROG BUTTON
TUNING KNOB
CD TRAY
OPEN / CLOSE
BUTTON
POWER BUTTON
POWER INDICATOR
TUNER
1) Turn the unit "ON" using the POWER
Knob.
2) Select the desired band using
FUNCTION Knob.
3) Tune in the desired station using the
TUNING Knob. If the FM ST. band was
4) Adjust the VOLUME controls to the desired
chosen, the FM STEREO indicator will
light up whenever a stereo broadcast
is received. To listen in Mono or to im-
PHONO
1) Set the FUNCTION Knob to the PHONO. 5) Place the tone arm on the desired position.
2) Set the speed selector to the proper position 6) Adjust VOLUME controls to the desired
depending on the record to be played.
3) Place the record on the platter (if required, 7) To stop manually, lift the tone arm from the
use the 33/45/78 rpm adaptor)
4) Lift the tone arm from the rest and slowly
move it to the record side. The platter will
begin to rotate.
TO PLAY VIA AUX-IN
This function is used to play audio from your portable/external audio device on this unit.
- Connect a RCA cable to the Aux-In jack on this unit and the output jack on your device.
- Switch the function selector to AUX.
- Press play on your device and enjoy.
prove noisy, weak-signal stereo broad-
cast, select FM Mono band using the
BAND FUNCTION switch. The STEREO
indicator will go off and FM Mono
will be received.
sound level.
sound level.
record, and return it to the rest.
04.
GB