NUTRIBULLET PRO 1000 Mode D'emploi page 8

Care & maintenance.
Cleaning the NutriBullet is easy.
®
The cups, lids, and blades are
TOP RACK dishwasher-safe.
Motor base can be quickly
hand-washed with soap and
water. Read on for best practices.
Here's how to clean
the NutriBullet :
®
STEP 1:
The most important thing —
ALWAYS POWER OFF THE UNIT
and UNPLUG the motor base
from the power outlet when it
is not in use. Do not attempt to
handle the appliance until all
parts have stopped moving!
This includes during assembly
and disassembly, while
changing accessories during
cleaning, and any time you
leave the machine unattended.
STEP 2:
Detach the NutriBullet cup
®
and easy-twist extractor blade
from the motor base.
STEP 3:
Clean the individual
components (motor base,
easy-twist extractor blade,
NutriBullet cups) as
®
recommended in the
this section.
14
MOTOR BASE:
NEVER
• To avoid risk of injury
attempt to clean the actuator
system on the motor base
while the NutriBullet PRO
®
1000 is plugged in.
• Do not attempt to remove any
pieces from the motor base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the
motor base until clean.
• If necessary, you may use
a small brush to scrub the
actuator system area to
ensure it's clean.
• To clean leakage residue
from the motor base, wipe
with a damp sponge and
warm water.
WARNING:
Never submerge
the motor base in water.
EASY-TWIST
EXTRACTOR BLADE:
• Blades are sharp! Handle
the easy-twist extractor
blade with care when
cleaning! Blades are TOP
RACK dishwasher-safe.
It is best to clean blades
immediately after use to
reduce buildup of residue. If
food particles get stuck, use
a small brush or sponge to
target and dislodge them.
• Do not remove any
components of the easy-twist
extractor blade; this can result
in permanent damage to the
blade, resulting in leakage
when blending. If, over time,
the easy-twist extractor blade
becomes loose or damaged,
you may order a new easy-
twist extractor blade at
nutribullet.com or contact
Customer Service.
• Dry the easy-twist extractor
blade completely after
every use.
• Regularly check the
condition of the bottom
of the blade for cracking
or breakage. If damaged,
replace easy-twist extractor
blade immediately to prevent
possible personal injury.
NUTRIBULLET CUPS
®
& TO-GO LIDS:
TOP RACK
These items are
dishwasher-safe. We recommend
rinsing and briefly scrubbing
them with a dish brush to remove
any remaining debris before
NEVER
placing in the dishwasher.
use the sanitize cycle to wash the
cups — heat this high can warp
the plastic.
Stubborn clean up:
If ingredients get stuck to the
NutriBullet cups or easy-twist
®
extractor blades, here's an
easy cleanup solution: fill the
vessel with room temperature
(21°C/70°F or less) water to its
MAX line and add 1-2 drops of
dish soap. Twist on the easy-
twist extractor blade and blend
on the motor base for 20-30
seconds. This should loosen the
debris enough to scrub it away
with soap and water.
How to store:
Store the NutriBullet PRO 1000
®
upright. Do not place anything
on top of it. Store remaining
pieces in a safe place where
they will not be damaged and
won't cause harm.
WARNING: NEVER
store the easy-
twist extractor blade on the motor
base without a NutriBullet cup as
®
the exposed blades pose a serious
laceration hazard.
Replacement parts.
To order additional parts and
accessories, please visit our
website at nutribullet.com/
shop/accessories or feel free
to contact Customer Service at
1-800-523-5993.
15