NORTH STATES 5428 Mode D'emploi page 5

• Tighten both of the bottom tension knobs by turning them
clockwise at the same time. Figure 4A.
• Tighten both of the upper tension knobs by turning them
clockwise at the same time, so that the gap between the gate and
upper right corner comes together, leave 1.5 ~ 2 mm gap as shown
in gure 4B.
4A
• Use the wrench provided to ease turning the tension knobs. Figure 4C.
4C
Note: When securing the gate in the opening, the distance between
the gate frame and the opening should not exceed 2 ¾" on either
side of the gate and the 4 tension bolts should be equal as shown in
gure 4D.
4B
4D
Page 5
1/16"
(1.5mm)