Baby Appleseed DAVENPORT Manuel D'assemblage page 24

Converting Your Davenport Crib Into A Toddler Bed
STEP FOUR
Attach the toddler rail to the
left and right panels using four
2" bolts.
Recheck and make sure all
bolts are securely fastened
and tightened.
!!READ ALL TODDLER BED
WARNINGS AND CAUTION
STATEMENTS ON PAGE 11
BEFORE USING!!
PAGE 24
Hardware needed:
2" Bolts
You may want to place a cloth
against the side panel slats while
attaching the rail to prevent
scratching of the wood.
Before using the bed, please
recheck all bolts and screws
and make sure they are tight
and secure. Be careful not to
over-tighten the hardware.
DAVENPORT CRIB ASSEMBLY MANUAL • ©2020 Baby Appleseed
x 4
® All Rights Reserved.