User Manual
Introduction
We are glad that you have chosen a LINDY product and thank you for having placed your trust in us. You can rely
on our products and our good service at any time.
With this practical power pack you'll have the correct wall plug for the socket both at home and abroad. It contains
exchangeable power supply plugs for Europe, Great Britain, North America and Asia. It supports input voltages
within the range of 100V to 240V.
Intended Use & Operation
This Power Supply is designed to supply electric devices with power, whereby the connected load´s current
consumption must not exceed the maximum output rating of the product.
For safety purposes you must not rebuild or modify this product. If the product is used for other
purposes than those described, it may be damaged. Improper use can cause hazards, for which we
assume no liability. Read the instructions carefully and keep them.
Pay attention to the correct polarity of the power supply and the equipment to be supplied ("+" on centre). Switch off
the device to be supplied, then plug the DC connector of the power supply into the device and finally plug the
power supply into an outlet.
Insert the required plug into the adapter. The plugs are keyed to avoid incorrect insertion. Push the adapter firmly
towards the housing, twist and allow the latch on the adapter to click into place. To remove, push the button
marked and twist in the opposite direction. Make sure the plug is locked firmly in place before use.
Never insert the plug separately into a mains socket!
Specification
Part No.
Input Voltage
Output Voltage
Output Current (max.)
Cable Length
DC connector size (outer/inner)
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
All manuals and user guides at all-guides.com
73824
5V DC
3A
3.5/1.35mm
4.8/1.7mm
73848
73849
100...240V AC, max. 50...60Hz
5V DC
9V DC
3A
2A
Approximately 1.5m
5.5/2.1mm
0-40°C
Max. 75%
-20-70°C
Max. 95%
English
73832
73807
12V DC
12V DC
1.25A
1.25A
5.5/2.1mm
5.5/2.5mm