Midea MU138SWAR1RC1 Manuel page 13

LOCK
To manually lock or unlock the control panel for use:
Press and hold
NOTE: Depending on the state of the Control Panel (locked or unlocked),
the Lock icon will either illuminate (locked) or turn off and a beep will
sound.
REFRIGERATOR/FREEZER MODE
This freezer has an advanced design feature that lets you change it from a
freezer to a refrigerator. You can switch from Freezer mode to Refrigerator
mode only by using the control panel.
The Freezer / Fridge light on the control panel indicates the current mode.
1.
Press and hold
2.
Press and hold
and the indicator light changes to the mode selected.
QUICK FREEZE
The Quick Freeze feature lowers the temperature below the normal
operating temperature to quickly freeze foods.
1.
Press and hold
2.
Press to select Quick Freeze mode. The blue snowflake icon
illuminates.
NOTE: You can press
The Quick Freeze mode turns off automatically:
•
After 3 hours, if the temperature falls below -13 °F (-25 °C).
•
After 24 hours, If the temperature does not fall below -13 °F (-25 °C).
TEMP DISPLAY (°F VS °C)
1.
Press and hold
2.
Press and hold
and Celsius.
RETURN TO FACTORY DEFAULT SETTINGS
1.
Press and hold
2.
Press and
freezer controls to the factory default settings.
NOTE: The control panel will beep and all indicators will illuminate for
3 seconds. If the compressor is running, it will pause for 5 minutes, and
then restart.
for 3 seconds.
for 3 seconds to unlock the control panel.
for 3 seconds to change modes. The panel beeps
for 3 seconds to unlock the control panel.
a second time to exit quick freeze mode.
for 3 seconds to unlock the control panel.
or for 3 seconds to switch between Fahrenheit
for 3 seconds to unlock the control panel.
buttons at the same time for 3 seconds to reset the
13