Equipment Needed To Proceed With The Installation - Cailabs AROONA-STAR Manuel D'instruction

2. Equipment needed to proceed with the installation

The following equipment is required to be able to splice AROONA-STAR product to the existing multimode fibers:
• Optical fusion splicer
• Lint-free wipes
• Cleaning solvent for fibers (isopropyl alcohol or isopropanol or ethanol)
• Kevlar scissors
• Stripper for cable and optical fiber
• Optical fiber cleaver
• Fiber optic extension (62.5 /125 or 50/125 depending on the type of MMF being connected)
• Splice protector
• 1310 nm single mode reflectometer
• SMF primer coil
• Single-mode optical cords
10